DCF Repair Patches – 7g, 15cm square

Managed to put your trekking pole through your expensive DCF tarp or tent? Fear not – this waterproof DCF patch will stick to it permanently and seamlessly thanks to its powerful 3M adhesive backing.

Clear white DCF blends in with all DCF colours for an almost invisible repair. All others are coloured and have the same performance.

It bonds to DCF and works with many other fabrics including PU, TPU and Thermarest, but will not adhere to silicon coated fabrics.

If a larger size patch is needed, send me a message via the contact form below.

Specification

• 3M reaction adhesive for a permanent structural bond on DCF
• ~15cm square
• 7g per patch
• Available in a choice of colours

Instructions

Be sure to stick this to the shiny side of your DCF gear. For 2.92oz and 5oz DCF, this will usually be inside (the rough outside is polyester).

1. Make sure the area to be repaired is clean and dry
2. Peel off the backing paper
3. Stick on the patch and press firmly to create a strong seal

Your problem is solved! Essential for any repair kit, this patch can be cut to size with sharp scissors.

If possible, leave the repaired area resting with weight pressing down on flat surface for up to 16 hours to achieve maximum bond strength.